Teak Wood Veneer Edgebanding Non-glued

Teak wood veneer edgebanding 1/40” thickness non-glued no adhesive with thin fleece backer which holds the product together, especially at the joints. Pictures are representative of the product which will vary in color and grain since this is a natural product. This is the ideal product to cover edges and other surfaces. This product can be manually applied or used in automatic edgebanders. Manual application can be done with many different adhesives. Contact cement is most common and two sided PSA tape is also a great option. Both are available in our tools and adhesives section. Wood glues will require pressure. It is best to use a size that is slightly over the size that needs to be covered, although it is possible to use the exact size. Once applied, the product can be trimmed with an edgeband trimmer, utility knife (both available in our tools and adhesives section) or sand off excess. There are pre-glued options for this veneer that have hot melt adhesive in the pre-glued section. Sizes available are approximate 1/2″ – 6″. This product usually ships within 1-2 days.

Roll lengths: 10′ feet – 25′ feet – 50′ feet – 100′ feet – 250′ feet – 500′ feet

Roll widths: From 1/2″ to 6″